ZOLTRIX, INC.

FM-HSP336P

Card Type                    Modem, Fax
Chip Set                     PCtel
I/O Options                  Line in (RJ-11), line out (RJ-11)
Maximum Modem Rate           33.6Kbps
Maximum Fax Rate             14.4Kbps
Data Modulation Protocol     Bell 103A/212A

                             ITU-T V.21, V.22, V.22bis, V.23, V.32,
                             V.32bis, V.34, V.34bis
Fax Modulation Protocol      ITU-T V.17, V.21CHANNEL2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis
Fax Class                    Class I
Data Bus                     16-bit ISA
Card Size                    Half-length, half-height card

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Line out                        CN1       Line in                 CN2

                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, A/

  A, B, D, E, H, I, L, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &P, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \G, \K, \L, \N

  %C, %E, %L

                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30,
  S32, S33, S37, S38, S86,

  S91

  Note: See MHI Help File for full command documentation.

                         Proprietary AT Command Set

                       TRELLIS CODING CONFIGURATION

  Type:          Configuration

  Format:        AT [cmds] &Un [cmds]

  Description:   Controls the Trellis coding settings

    Command                              Function

     í &U1       Trellis coding disabled

      &U1        Trellis coding enabled

                            Extended AT Commands

                            CPU USAGE SETTINGS

  Type:              Configuration

  Format:            AT [cmds] %Nn [cmds]

  Description:       Selects the total usage of the CPU while operating
                     the modem. Default=%N7

                             S(Status)-Register

                              V.34 DATA RATE

  Type:          Register

  Format         AT [cmds] S34=n [cmds]

  Default:       11

  Range:         Unidentified

  Unit:          bits

  Description:   Determines the data rate while using V.34 compression

                             V.34 SYMBOL RATE

  Type:          Register

  Format         AT [cmds] S34=n [cmds]

  Default:       0

  Description:   Determines the baud rate while using V.34 compression